WAGNER PEM-X1 - Cleaning and Maintenance; Cleaning

34
PEM-X1
OPERATING MANUAL
VERSION 09/2012 ORDER NUMBER DOC 2326020
The cleaning intervals should be adapted by the operator depending on the level of use
and if necessary the level of soiling.
In doubt, we recommend to contact J. Wagner AG's specialist personnel.
The valid health and safety speci cations and the safety instructions provided in chapter 4
must be adhered to for all cleaning work.
8.1.3 CLEANING PROCEDURES
Incorrect maintenance!
Risk of injury and damage to the equipment.
If contact with powder materials or cleaning agents causes skin
irritation, appropriate precautionary measures must be taken,
e.g. wearing protective clothing.
The footwear worn by operating sta must comply with
EN ISO 20344. The measured insulation resistance must not
exceed 100 MΩ (megaohms).
The protective clothing, including gloves, must comply with
EN ISO 1149-5. The measured insulation resistance must not
exceed 100 MΩ (megaohms).
WARNING