3
PEM-X1
OPERATING MANUAL
VERSION 09/2012 ORDER NUMBER DOC 2326020
Contents
1 GENERAL INFORMATION 6
1.1 Preface 6
1.2 Warnings, Notes and Symbols in these Instructions 6
1.3 Languages 7
1.4 Abbreviations 7
2 CORRECT USE 8
2.1 Device Type 8
2.2 Correct Use 8
2.3 For Use in Potentially Explosive Areas 8
2.4 Safety Parameters 8
2.5 Processing Materials 9
2.6 Reasonably Foreseeable Misuse 9
2.7 Residual Risks 9
3 IDENTIFICATION 10
3.1 Explosion Protection Identi cation 10
3.2 Permissible Device Combinations 10
4 GENERAL SAFETY INSTRUCTIONS 11
4.1 Safety Instructions for the Operator 11
4.1.1 Electrical Devices and Operating Equipment 11
4.1.2 Personnel Quali cations 11
4.1.3 A Safe Work Environment 11
4.2 Safety Instructions for Sta 12
4.2.1 Safe Handling of WAGNER Powder Spray Devices 12
4.2.2 Grounding the Device 12
4.2.3 Material Hoses 12
4.2.4 Cleaning 13
4.2.5 Handling Powder Paints 13
4.3 Information about Harmless Discharges 14
4.4 Protective and Monitoring Equipment 15
5 DESCRIPTION 16
5.1 Design of the Spray Gun 16
5.2 Functioning of the Spray Gun 16
5.3 Technical Data 17
5.3.1 Dimensions 18
5.4 Permitted Accessories 19
5.5 Scope of Delivery 19
6 ASSEMBLY AND COMMISSIONING 20
6.1 Quali cation of the Assembly/Commissioning Sta 20
6.2 Storage Conditions 20
6.3 Installation Conditions 20
6.4 Preparing the Spray Gun 21
6.4.1 Selection of the Suitable Nozzle System 21
6.5 Connecting the Spray Gun 23
6.6 Grounding 25
6.6.1 Grounding the Powder Coating System 26
To Next Page
Loading...
Need help?
General
