35
PEM-X1
OPERATING MANUAL
VERSION 09/2012 ORDER NUMBER DOC 2326020
8.2 MAINTENANCE
Maintenance work should be undertaken regularly and carefully by quali ed and trained
sta . They should be informed of speci c hazards during their training.
The following hazards may arise during maintenance work:
Health hazard from inhaling powder paint
Use of unsuitable tools and aids
Once the maintenance work is complete, the device must be checked by a quali ed person
to ensure its safe condition.
8.2.1 MAINTENANCE STAFF
8.2.2 SAFETY INSTRUCTIONS
Incorrect maintenance/repair!
Risk of injury and damage to the equipment.
Have repairs and part replacements be carried out by specially
trained sta or a WAGNER service center.
Before all work on the unit and in the event of work interruptions:
- Switch o the energy/compressed air supply.
- Decompress spray gun and device pressure.
- Secure the spray gun against actuation.
Observe the operating and service instructions when carrying
out all work.
DANGER
Incorrect maintenance/repair!
Danger to life and equipment damage.
Corrective maintenance, repair or replacement of devices or
parts of devices may only be performed outside the hazard area
by specialized personnel.
DANGER
To Next Page
Loading...
Need help?
General
