60
PEM-X1
OPERATING MANUAL
VERSION 09/2012 ORDER NUMBER DOC 2326020
13 SPARE PARTS
13.1 HOW TO ORDER SPARE PARTS?
To ensure proper spare parts delivery, the following information is necessary:
Order number, designation and quantity
The quantity does not have to be identical to the numbers in the "Stk" columns of the lists.
This number merely indicates how many of the respective parts are used in each module.
The following information is also required to ensure smooth processing of your order:
Identi cation in spare parts lists
Explanation of column "K" (labeling) in the following spare parts lists.
- Address for invoice
- Address for delivery
- Name of the person to be contacted in the event of any queries
- Type of delivery (normal mail, express delivery, or courier, etc.)
= Wearing parts
Note: No liability is assumed for wear parts
= Not part of standard equipment, available, however, as additional extra.
Incorrect maintenance/repair!
Risk of injury and damage to the device.
Have repairs and part replacements be carried out by specially
trained sta or a WAGNER service center.
Before all work on the unit and in the event of work interruptions:
- Switch o the energy/compressed air supply.
- Ensure that all system components are grounded.
- Secure the unit against being switched back on without
authorization.
Observe the operating and service instructions when carrying
out all work.
WARNING
To Next Page
Loading...
Need help?
General
