WAGO PFC200 2ETH RS XTR User Manual

WAGO I/O SYSTEM 750 XTR Commissioning 191
750-8202/040-000 PFC200 2ETH RS XTR
Manual
Version 1.2.0, valid from FW Version 03.01.07(13)
7.8.1.42.12 “PLC Runtime” > “WebVisu” Submenu
This submenu contains information and settings for the Web visualization.
Table 139: “PLC Runtime” > “WebVisu” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. CODESYS 2 Webserver
State
The status of the CODESYS 2 Webserver is
displayed.
2. e!RUNTIME Webserver
State
The status of the e!RUNTIME Webserver is
displayed.
3. Default Webserver
Choose here whether the Web-based Management
or web visualization of the runtime system should be
displayed when only entering the IP address of the
controller.
0. Back to …
Back to the higher-level menu
1. Web-based
Managem
ent
The Web-based Management is
displayed.
2. CODESYS
WebVisu
The web visualization of the runtime
system is displayed.
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].

WAGO PFC200 2ETH RS XTR Specifications

General

Processor	ARM Cortex-A8
Clock Speed	600 MHz
RAM	256 MB
Ethernet Ports	2
Protection Class	IP20
Power Supply	24 V DC
Serial Ports	1 (RS-232/RS-485)
Operating Temperature	-40°C to +70°C
Programming Languages	IEC 61131-3
Certifications	UL