WAGO PFC200 2ETH RS XTR User Manual

216 Commissioning WAGO I/O SYSTEM 750 XTR
750-8202/040-000 PFC200 2ETH RS XTR
Manual
Version 1.2.0, valid from FW Version 03.01.07(13)
7.8.1.50 “Ports and Services” Menu
This submenu contains other submenus with settings for the respective services.
Table 175: “Ports and Services” Menu
Menu Item
Explanation
0. Back to …
Back to the higher-level menu
1. Telnet
Opens a submenu with settings for the Telnet
service
2. FTP
Opens a submenu with settings for the FTP service
3. FTPS
Opens a submenu with settings for the FTPS
service
4. HTTP
Opens a submenu with settings for the HTTP
service
5. HTTPS
Opens a submenu with settings for the HTTPS
service
6. NTP
Opens a submenu with settings for the NTP service
7. SSH
Opens a submenu with settings for the SSH server
8. TFTP
Opens a submenu with settings for the TFTP server
9. DHCPD
Opens a submenu with settings for the DHCPD
service
10. DNS
Opens a submenu with settings for the DNS service
11. IOCHECK PORT
Opens a submenu with settings for the WAGO-I/O-
CHECK port
12. Modbus TCP
Opens a submenu with settings for the Modbus TCP
service
13. Modbus UDP
Opens a submenu with settings for the Modbus UDP
service
14. OPC UA
Opens a submenu with settings for the OPC UA
service
15. PLC Runtime Services
Opens a submenu with settings for the PLC runtime
system services
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].

WAGO PFC200 2ETH RS XTR Specifications

General

Processor	ARM Cortex-A8
Clock Speed	600 MHz
RAM	256 MB
Ethernet Ports	2
Protection Class	IP20
Power Supply	24 V DC
Serial Ports	1 (RS-232/RS-485)
Operating Temperature	-40°C to +70°C
Programming Languages	IEC 61131-3
Certifications	UL