Weiler E1650 - Wheel Specifications; Performance Specifications

WEILER E1650 REMIXING TRANSFER VEHICLE
A-2
Wheels
1
Specifications
A
Elevator Capacity...................................................... 1000 ton/hr (900 tonne/hr)
Dump Hopper Width ................................................. 9’ 3” (2.8 m)
Elevator Width .......................................................... 5’ (1.5 m)
Elevator Slat Width................................................... 4’ 8” (1.4 m)
Discharge Conveyor Capacity................................... 600 ton/hr (544 tonne/hr)
Discharge Conveyor Slat Width ............................... 2’ 6” (0.76 m)
Weight, empty ........................................................... 67,000 lb (30391 kg)
Turning Radius with rear steer................................ 17’ (5.2 m)
Turning Radius without rear steer .......................... 30’ (9.1 m)
WHEELS
Tires ........................................................................... High Flotation 18”-25”, 28 ply
Tire Pressure ............................................................. 94 psi (648 kPa)
Wheel Bolt Torque..................................................... 330 ft-lb (450 Nm)
PERFORMANCE SPECIFICATIONS
Speed
Transport (forward and reverse) .............................. 9.2 mph (14.8 km/hr), max
Work High.................................................................. 2.3 mph (3.7 km/hr), max
Work Low................................................................... 202 fpm (62 m/min), max