Weiler E1650 - Sound and Vibration Levels

WEILER E1650 REMIXING TRANSFER VEHICLE
3-3
Operating Instructions
3
Sound Levels
SOUND LEVELS
Sound pressure and sound power levels were determined according to test procedures specified in
ISO 3744 and ISO 11201. Guaranteed per EU Directive 2000/14/EC.
Equivalent Continuous A-Weighted Sound Pressure at Operator’s Ear for T4F engine is L
Aeq
= 76
dB(A).
Representative Sound Power Level for T4F engine . . . . . . . . . . . . . . . . . . . . . . . . . . L
wa
= 104 dB(A)
The stated sound levels are representative for a given operating condition. Operating conditions may
vary at each jobsite. The actual sound levels for your application and operating conditions may be
different.
VIBRATION LEVELS
Hand/arm vibration exposure has been measured according to test procedures specified in ISO 5349.
Left hand/arm vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . less than 2.5 m/s
2
Right hand/arm vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . less than 2.5 m/s
2
Whole body vibration exposure has been measured according to test procedures specified in ISO 2631.
Whole body vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . less than 0.5 m/s
2