1
WEILER E1650 REMIXING TRANSFER VEHICLE
4-6
Transporting
4
Trailering Machine
1. Close and lock dump hopper controls (1) and conveyor control (2) covers.
2. Place mirrors in storage location.
3. Remove and store blade lights (3) in a secure
location.
4. Rotate seat so operator is facing front of machine.
5. Slowly drive machine squarely onto trailer. Do not
use high gear.
6. Position machine at tie-down position for correct
weight distribution as recommended by trailer
manufacturer.
7. Use Platform Shift Switch to center platform before
transporting to maintain minimum machine width
during shipping.
8. Shutdown machine. Refer to "Machine Shutdown
Procedure", page 3-13.
9. Fold seat into transport position (4).
10. Close and lock center control covers (5).
11. Turn Battery Ground Disconnect Switch off.
12. Lock engine enclosure doors using ignition key.
To Next Page
Loading...
