EasyManua.ls Logo

Weiler E1650 - Maintenance; Maintenance Safety Messages

Weiler E1650
174 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WEILER E1650 REMIXING TRANSFER VEHICLE
5-1
Maintenance
5
Safety Messages
SECTION 5: MAINTENANCE
SAFETY MESSAGES
Refer to "Machine Shutdown Procedure", page 3-13, for instructions.
WARNING
Read Operator’s and Maintenance Manual and safety signs before performing
maintenance on machine.
WARNING
Wear personal protective equipment (PPE).
Always wear:
Eye protection
Safety shoes or boots
Some working conditions and regulations may require the use of other
appropriate PPE, such as hearing protection, hard hat, gloves, face shield, or
any other PPE necessary to provide proper safety protection for the work
being performed.
WARNING
Follow Shutdown Procedure before inspecting, fueling, cleaning,
transporting, lubricating, repairing, or servicing machine.
WARNING
Pressurized fluid can penetrate body tissue. Leaks can be invisible. Keep
away from any suspected leak. Relieve pressure in the hydraulic system
before searching for leaks, disconnecting hoses, or performing any other work
on the system. When searching for a pressurized leak, use an object such as a
piece of wood or cardboard. Keep hands away. When loosening a fitting
where residual pressure can exist, slowly loosen fitting until fluid begins to
leak. Wait for leaking to stop before disconnecting fitting. Tighten all
connections before re-pressurizing system. Seek immediate surgical
treatment if fluid is injected under skin.
WARNING
Runover possible. Contact with moving parts can cut or crush.
Make sure no one is working on, underneath, or close to machine before
starting engine or moving machine. Ensure area is free of personnel. Keep
spectators away.

Related product manuals