1
WEILER E1650 REMIXING TRANSFER VEHICLE
4-8
Transporting
4
Trailering Machine
Unloading
1. Place trailer on a level surface away from overhead obstacles and chock wheels or set park brake
on tow vehicle.
2. Place and secure appropriate ramps as needed.
3. Remove tie-downs and chocks.
4. Install mirrors.
5. Adjust seat and mirrors for best visibility.
6. Open center control covers.
7. Start engine. Follow "Machine Starting Procedure", page 3-7.
8. Increase engine speed to full rpm. Place in low gear.
9. Slowly drive machine squarely off trailer.
To Next Page
Loading...
