WEILER E1650 REMIXING TRANSFER VEHICLE
3-13
Operating Instructions
3
Machine Shutdown Procedure
MACHINE SHUTDOWN PROCEDURE
1. Turn Park Brake (1) on.
2. Turn Elevator/Remix/Conveyor drive off.
3. Lower elevator to place dump hopper firmly on
ground or raise elevator and engage both lift stops.
4. Completely lower discharge conveyor.
5. Reduce engine rpm to low/idle. Allow to idle for at
least 3 minutes when shutting down after operating
at full power.
6. Turn engine off and remove ignition key (2).
7. Turn Battery Ground Disconnect Switch (3) off
when shutting machine down for the day.
To Next Page
Loading...
