EasyManua.ls Logo

Weiler E1650 - Maintenance Procedures

Weiler E1650
174 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WEILER E1650 REMIXING TRANSFER VEHICLE
5-7
Maintenance
5
Maintenance Procedures
MAINTENANCE PROCEDURES
Air Cleaner Service Indicator - Check
Replace air filter element when red indicator reaches the
window on indicator (1). Push button (2) to reset
indicator.
Do not remove element until indicator shows
replacement is necessary.
NOTICE: The air restriction indicator will not function
properly if:
Element is damaged or not seated properly in
housing.
Air filter element body is damaged. If so, unfiltered air may enter engine.
Air transfer duct between air filter and engine is damaged or its clamps are loose.
Air duct between air filter and restriction indicator is damaged or pinched.
Augers - Inspect / Replace
Corners of new augers are square. As augers wear,
thickness and diameter decrease. When edge (1) wears
to a point, auger should be replaced.
1. Inspect dump hopper/windrow augers and storage
augers.
2
1
1

Related product manuals