WEILER E1650 REMIXING TRANSFER VEHICLE
vi
Introduction
INTRODUCTION
Thoroughly read and understand these instructions and store the tethered manual in the manual
holder on the machine for future reference.
When purchasing a used Weiler machine you are requested to contact Weiler Customer Service at
641-828-6622 or at www.weilerproducts.com and request a customer login and password to gain
access to online manuals for this machine.
Additional copies of the manuals are available from an authorized Weiler dealer. When ordering a
new manual, use the part number on the front cover.
I
NTENDED USE
A E1650 Remixing Transfer Vehicle is used to transfer bulk asphalt material from delivery vehicles
to a paving machine. The machine receives paving material in the forward dump hopper, or picks
windrowed material up off of the roadway, delivers the material to the center hopper for storage and
remixing, and then conveys the material to the hopper of a paving machine.
Always use the machine in accordance with the instructions contained in this Operator’s and
Maintenance Manual, safety signs on the machine, and other material provided by Weiler. Usage in
any other way is considered contrary to the intended use.
Proper maintenance and repair are essential for safety and for efficient operation of the machine. Do
not use the machine if it is not in suitable operating condition.
This safety alert system identifies important safety messages in this
manual.
When you see this symbol, be alert, your safety is involved, carefully read
the message that follows, and inform other operators.
To Next Page
Loading...
