Weiler E1650 - Machine Starting Procedure

1
WEILER E1650 REMIXING TRANSFER VEHICLE
3-8
Operating Instructions
3
Machine Starting Procedure
5. Turn Ignition Switch (2) on, press Engine Start
Button (3).
Press and release Engine Start Button to activate
auto-start mode. When auto-start mode is active,
engine will start or starter will run for 10 seconds.
Press and hold Engine Start Button to manually
start engine. When Engine Start Button is pressed
and held, engine will crank for a maximum of 10
seconds.
NOTICE: Engage various hydraulic systems at lower
engine speeds until hydraulic fluid is warm to avoid
system damage.
2
3