Weinmann MEDUVENT Standard - 9.4 Patient presets

WM 67851 01/2021
MEDUVENT Standard EN 109
9 Operator menu
9.4 Patient presets
Parameter (IPPV mode) Possible values Description
Factory
setting
Infant
Vt 50 ml - 2000 ml Here you can preset the tidal volume. 60 ml
Freq. 5 /min - 40 /min
Here you can preset the ventilation
frequency.
30 /min
PEEP 0 mbar - 20 mbar
Here you can preset the positive end-
expiratory pressure.
0 mbar
pMax 10 mbar - 60 mbar
Here you can preset the maximum
inspiratory pressure.
20 mbar
pMax Manual 20 mbar - 60 mbar
Here you can preset the maximum
inspiratory pressure in Manual mode.
20 mbar
Reset to facto-
ry settings
–
Here you can reset the settings for this
patient group to their factory settings.
–
Child
Vt 50 ml - 2000 ml Here you can preset the tidal volume. 200 ml
Freq. 5 /min - 40 /min
Here you can preset the ventilation
frequency.
20 /min
PEEP 0 mbar - 20 mbar
Here you can preset the positive end-
expiratory pressure.
0 mbar
pMax 10 mbar - 60 mbar
Here you can preset the maximum
inspiratory pressure.
25 mbar
pMax Manual 10 mbar - 60 mbar
Here you can preset the maximum
inspiratory pressure in Manual mode.
25 mbar
Reset to facto-
ry settings
-
Here you can reset the settings for this
patient group to their factory settings.
–
Adult
Vt 50 ml - 2000 ml Here you can preset the tidal volume. 500 ml
Freq. 5 /min - 40 /min
Here you can preset the ventilation
frequency.
10 /min
PEEP 0 mbar - 20 mbar
Here you can preset the positive end-
expiratory pressure.
0 mbar
pMax 10 mbar - 60 mbar
Here you can preset the maximum
inspiratory pressure.
30 mbar
pMax Manual 20 mbar - 60 mbar
Here you can preset the maximum
inspiratory pressure in Manual mode.
30 mbar
Reset to facto-
ry settings
-
Here you can reset the settings for this
patient group to their factory settings.
-