Weinmann MEDUVENT Standard - 12.6 Sending in parts

WM 67851 01/2021
MEDUVENT Standard EN 147
12 Maintenance
12.6 Sending in parts
1. Dismantle parts.
2. Clean and disinfect parts (see “7 Hygienic reprocessing”, page
70).
3. Send parts to WEINMANN Emergency, or to a technician
specifically authorized by WEINMANN Emergency.
Risk of infection due to contaminated parts during
maintenance work!
The device, accessories and other parts may be contaminated and
infect the technicians with bacteria and viruses. Parts sent in which
are clearly contaminated will be disposed of at the cost of the
sender by WEINMANN Emergency or by technicians authorized by
WEINMANN Emergency.
 Clean and disinfect parts required for maintenance measures.
 Do not send in parts which are potentially contaminated.