52 EN MEDUVENT Standard
WM 67851 01/2021
5 Function check
15. Select Next.
The status report appears (example: Function check passed).
16. Proceed with the device in accordance with the following table:
17. Select Finish.
On delivery, the filter reset code is 0000. WEINMANN Emergency
recommends changing this code as soon as the device is put into
operation.
Display Meaning Action
Device ready for use Function check passed
Use device without
restriction.
Device not ready for use
Function check failed
or
Function check canceled
Select Details. Check
the parts listed in the
display and replace them
if necessary. Repeat the
function check.
If the function check is
still not passed: Contact
your authorized dealer or
the manufacturer.
Device ready for use.
After the function check,
the service symbol in the
start screen flashes.
Function check passed,
but service required.
Information about the
scheduled service.
Contact your authorized
dealer or the
manufacturer.
For precise details on the individual tests in the function check,
refer to the fcheck file on the SD card (see “16.8.2 Recorded
function checks (fcheck file)”, page 174).
To Next Page
Loading...
