eikon e1s
Service and repair guide
2D. Cooking procedures
How to cook
1. On a preheated oven, select a
cooking profile from the cookbook
or enter a new cooking profile.
See Section 2E for instructions on
how to enter a new cooking profile.
2. Open the appliance door and
place the prepared food on the
cook plate.
Hot surface
Ensure all packaging has been
removed.
3. Close the appliance door again.
The cooking process will
automatically start if the program
was selected in step 1.
Alternatively, the program can be
selected or changed at this stage.
4. Wait for the cooking process to
finish. An audible signal is given
when the cooking process is
finished. Follow the prompts
displayed by the software.
Do not open the oven door while
the food is cooking.
5. Open the appliance door and
take the food out.
Hot surface
Do not remove cook plate unless
cleaning.
Never leave food in the oven, as it
will continue cooking.
6. Close the appliance door again
after taking the food out.
The cooking program is reset now
and a new cooking profile can be
selected to use the oven again.
To Next Page
Loading...
