Replacing the convection fan motor and heating element
Requirements and tools
Check that the following requirements have been met:
• The appliance has been disconnected from the power supply and protective measures have been taken to ensure
the power cannot be switched on again.
• The appliance is cool.
• The casing of the appliance has been removed.
• The high voltage capacitors are discharged before commencing work.
• Anti-static precautions have been taken.
Tools required:
• M7 hex socket wrench
• Pozidriv PZ1 screwdriver
Component location
The convection motor is positioned on the rear of the cavity.
The element connections can be seen to the left of the convection motor.
To Next Page
Loading...
