All service engineers must familiarize themselves with the information in Section 1: Safety. before using this Service
and Repair Guide to carry out tests.
Test types
The following tests can be performed by service engineers:
• Components test with a Portable Appliance Tester (PAT)
• Microwave power test
• Microwave leakage test
• Temperature Control test
• Soak test
• Recommission test
• Main voltage test
Equipment required for tests
• Portable Appliance Tester (P.A.T.)
• Digital Multi-Meter (D.M.M.)
• Microwave detection / leakage meter
• Temperature reader
• Continuity meter
• Door Spacer Kit (4mm) part number PSA1109
• Microwave safe 600 ml glass beaker
• Microwave safe 2 liter container
To Next Page
Loading...
