To Next Page

To Previous Page

Service Manual CP 100 and CP 200 Electrocardiograph 19

Reviewing the Device Information

1. Press the Menu key .

2. Choose System Settings > Device Info.

The following screen appears.

Figure 17. “Device Info” CP 200 Screen

3. Select the desired item:

Item Description

About Displays the following information about the electrocardiograph:

• serial number

• modules configured

• version numbers

Print Settings CP 200 = Prints your ECG, spirometry, and system settings as well as medication &

history lists.

CP 100 = Prints your ECG and system settings.

Enable Options Contact Technical Support. For phone numbers, see page ii.

Upgrade Software Contact Technical Support. For phone numbers, see page ii.

Service Info Accessible to service support only. See Service Menus (page 20)

System Setup : Device Info

1 About

2 Print Settings

3 Enable Options

4 Upgrade Software

5 Service Info

0 Previous Menu

9:17AM Mar 16 05

Device Info