Welch Allyn CP 100 Service Manual

B
79
EMC Guidance and Manufacturer’s
Declarations
Table 15. Electromagnetic Emissions
The electrocardiograph is intended for use in the electromagnetic environment specified below. The customer or user of the electrocardiograph
should assure that it is used in such an environment.
Emissions Test Compliance Electromagnetic Environment - Guidance
RF emissions
CISPR 11
Group 1 The electrocardiograph uses RF energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11
Class A The electrocardiograph is suitable for use in all establishments other than domestic and
those directly connected to the public low-voltage power supply network that supplies
buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies

Welch Allyn CP 100 Specifications

General

Brand	Welch Allyn
Model	CP 100
Category	Medical Equipment
Language	English