Setup
Supplies and accessories
For a list of all approved supplies and accessories, see the VSM 6000 Series Approved Accessories
in the Appendix.
Insert the battery
This procedure applies to first-time setup of the monitor. Therefore, the monitor is assumed to be
shut down.
WARNING Risk of fire, explosion, and burns. Do not short-circuit, crush,
incinerate, or disassemble the battery pack.
1. Turn the monitor upside down to access the battery cover.
2. Locate the battery cover, indicated by .
3. Insert a coin into the slot and push to open. Choose a coin that fits comfortably into the slot.
4. Slide in the battery.
17
To Next Page
Loading...
