Welch Allyn VSM 6000 series - Modifiers; Set Modifiers

At the Delete Confirmation window, touch OK to permanently delete the selected patient.
Touch Cancel to cancel the deletion.
Note Deleting a patient from the Patients List does not delete saved
records. Touch Review to see or delete saved records.
Modifiers
Modifiers allow you to enter additional information for the measurements taken from a patient.
Set modifiers
1. Touch the Patients tab.
2. Touch the Modifiers tab.
3. Adjust the NIBP and SpO2 settings as required.
4. Touch OK to accept the changes and return to the home screen, or touch Clear to delete all
entries.
The Modifier settings clear after a power cycle, after you clear the Home tab, or after you
select a new patient.
48
Patient data management Welch Allyn Vital Signs Monitor 6000 Series™