Welch Allyn VSM 6000 series - Select a Profile

Profile feature comparison
The following table compares the features of the profiles.
Feature Monitor Spot Check Triage
Take NIBP, SpO2,
temperature, and pulse
rate readings
X X X
Configure and use interval
timing setting
X
Observe and configure
alarm limits
X
Observe and respond to
physiological alarms
X
Change patient type
(adult, pediatric, neonate)
X X X
View and enter manual
parameters (height,
weight, pain, respiration)
Home tab displays up to
four parameters based on
Advanced settings.
Can enter parameters
manually in Patients tab.
Home tab displays up to
four parameters based on
Advanced settings.
Can enter parameters
manually in Patients tab.
Cannot enter parameters
manually.
Save currently displayed
data to device memory
X X X
Save and review patient
data
X X X
Access Patients tab X X
Access Alarms tab X
Access Review tab X X X
Access Settings tab X X X
Select a profile
Follow these steps to select a profile, which controls the appearance and functionality of the
device.
1. Touch Settings.
2. Touch Profiles.
3. Touch the desired profile.
4. Touch Home to return to the Home tab.
Note Profiles cannot be changed while acquiring patient measurements
or while unsaved patient measurements are on the display.
Directions for use Profiles 37