Welch Allyn VSM 6000 series - Data Management

2. Touch the Parameters tab.
3. Touch the Manual tab.
4. Select up to four parameters and associated units of measure for display in the Manual
Parameters frame.
If SureTempPlus is connected to the monitor, the Temperature parameter is not available
here or in the Manual Parameters frame.
5. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit.
Data management
Specify patient ID settings
Patient identification appears on the Home tab in the Patient frame, and it is listed in various tabs,
such as the Patient tab and the Review tab.
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code.
d. Touch OK.
The General tab appears.
2. Touch the Data Management tab.
3. Touch the Patient IDs tab.
4. Specify settings.
Setting Action/Description
Name format Select a format for all displayed patient names:
Full name or Abbreviation.
Primary label Select the primary identification label for all
displayed patients.
116
Advanced settings Welch Allyn Vital Signs Monitor 6000 Series™