Westerbeke Universal M-50 - Replacing Crankshaft Bearing 1

REPLACING CRANKSHAFT BEARING 1
1. Prepare the necessary tool as shown in Figs (A) and (B).
2. Press out the bearing 1, using the extracting tool.
3. Insert a new bearing 1, using the inserting tool, taking due care to see that the contact edge
of bearing 1 faces the exhaust manifold side.
[A] Tool for extracting crankshaft bearing 1
[B]
Tool for inserting crankshaft bearing 1
13C1tS.I2"1
1301512"1
[C] Crankshaft and crankshaft bearing 1. as assembled
(2)
130