POINTS OF INSPECTION AND CHANGING
ENGINE LUBRICATING OIL
Brand name oil (for diesel engines) or CC/CD class oils defined
by
SPI. It should be as follows
according
to
temperature.
SAE-30
HD
or 10W-40
HD
CHECKING ENGINE OIL LEVEL
Stop for 5 minutes or more and remove the dip stick, wipe off dip stick
and
recheck. Read the
engine
oil level
on
the dip stick. If the oil level is below the lower mark
on
the dip stick, add
sufficient
oil
to
the full mark.
DO
NOT
OVERFILL.
1. Dip
Stick
2. Oil Filler Plug
CHANGING ENGINE OIL
Drain the oil while the engine is still warm, by removing the drain plug
on
the oil
pan
and oil filler
plug, or through the oil drain
hose,
so
that the oil may completely drain.
Do
not mix different brands of oil. If a different brand of oil should
be
employed, drain out the
existing
oil
no
matter how new it may be and then replace it.
Do
the same when using oil of a
different viscosity.
1.
Oil Drain Plug
22
To Next Page
Loading...
