Operation7218−1/A1
Winterthur Gas & Diesel Ltd.
2/ 19
2. Description
The diagrams in Fig. 1 show the complete cylinder lubricating system, which has the
components that follow:
D Lube oil tank for cylinder lubricating oil (plant side).
D Duplex filter 8.17 (one).
D Lubricating pumps 8.06 (one for each cylinder) with Advanced Lubrication
Module−20 (ALM−20), 4/2-way solenoid valve and pressure transmitter.
D Lubricating quills 8.12 (eight for each cylinder) with non-return valves.
D Pressure reducing valve 8.11−1 (one) and pressure reducing valve 8.11−2 (one,
only for 9-cylinder engines).
D System control from the WECS-9520. For more data, see 4002−1,
paragraph 3.4.
2.1 Cylinder Lube Oil Tank (Plant Side)
The lube oil tank for the cylinder lubricating oil is installed at a specified height above
the engine (see Fig. 1). This lets static pressure move the oil down. The cylinder
lubricating oil flows through the supply pipe to the duplex filter 8.17 and to the cylinder
lubricating pumps 8.06.
2014-09
Cylinder Lubrication
To Next Page
Loading...
Need help?
General
