Operation
7218−1/A1
Winterthur Gas & Diesel Ltd.
19/ 19
8.4 Lubricating Oil Feed Rate − Adjustment
It is possible to adjust the lubricating oil feed rate in steps of 0.1 g/kWh. Use the user
parameters in the columns Supply Rate and Adjustment for one cylinder, or for all
cylinders (see 4002−3, paragraph 1.1).
For more data about the adjustment of the lubricating oil feed rate, see 7218−3.
For data about the guide feed rates for running-in of new cylinder liners and piston
rings, see 0410−1, paragraph 4, Cylinder lubricating oil feed rate, and paragraph 5,
Running-in sequence.
2014
Cylinder Lubrication
To Next Page
