Maintenance2124−2/A1
RT-flex58T-D
Winterthur Gas & Diesel Ltd.
4/ 7
3. Removal and fitting of antipolishing ring
3.1 Removal
⇒ Fit four suspension straps 94208.
⇒ Turn the piston to T.D.C. whereby antipolishing ring 4 is pushed out of its seat-
ing and then it can be removed.
3.2 Fitting
⇒ Clean the seating surfaces on the antipolishing ring and cylinder liner.
⇒ Fit four suspension straps 94208.
D Pay attention that one of the holes for fastening the suspension straps lies on
fuel side.
⇒ Smear the antipolishing ring lightly with oil.
⇒ Fasten the ropes to the suspension straps and fit the antipolishing ring by
means of the crane.
4
D
94208
2
003.468/00
Cylinder Liner
Removal and Fitting
2013
To Next Page
Loading...
