Maintenance2751−1/A1
RT-flex58T-D
Winterthur Gas & Diesel Ltd.
2/ 5
2. Removal
⇒ Remove all connected pipes.
⇒ Removal of hydraulic pipe see 8460−1.
2.1 Dismantling the expansion piece
⇒ Expansion piece 6 has to be removed with the aid of lifting lugs 94811 and the
wire rope sling GF 94333D. Therefore, two screws of each suspension strap
have to be screwed into the expansion piece flange. After removing the con-
necting screws from the expansion piece flanges the expansion piece can be
taken out in the engine longitudinal direction.
C
015.240/11a
GF 94333D
94811
2
1
I - I
7
I
3
FLOW
DIRECTION
6
I
2013 / V2
Removal and Fitting of Exhaust Valve, Replacing of Elastic Studs
To Next Page
Loading...
