Maintenance
3403−1/A1
RT-flex58T-D
Winterthur Gas & Diesel Ltd.
5/ 7
When the piston has to be dismantled, it must be secured against turning when
loosening elastic screws 11, whereby the procedure is as follows:
⇒ Lower the piston until access is obtained to securing screws 13.
⇒ In place of straps 16 which are fixed to the piston as shown in Fig. ’F’, loosen
and remove securing screws 13 together with their locking plates and locking
elements 12.
⇒ Fully lower the piston and fit the straps by means of the securing screws.
I I
I - I
16
16
94341
94350
3
11 12
13
1
2
16
F
010.980/03
FUEL SIDE
11
V2 / 2013
Piston: Removal and Fitting
To Next Page
Loading...
