Maintenance3425−1/A1
RT-flex58T-D
Winterthur Gas & Diesel Ltd.
6/ 7
4. Removing piston rings
For removing piston rings 1, always use the corresponding tensioning device with
its specially designed claws 4 preventing the coating from being chipped off at the
ring ends.
To prevent deformation it is of the utmost importance not to open the rings
more than absolutely necessary, i.e. allowing removal over the piston
crown.
⇒ Thoroughly clean piston, piston rings and piston ring grooves.
D Take care not to damage the chromed surfaces.
F
017.681/08
94338
4
1
2013-08
Checking Wear of Piston Rings and Ring Grooves with Four Piston Rings
To Next Page
Loading...
