Operation Manual simco
®
drive
Revision: 11a 4022-D033499 en-15
日本語
5.3.3 Demounting IP20
The demounting of the drive can be done by pressing down and pulling the drive out of the
top-hat rail.
5.3.4 Installation space IP20
The central variant of the drive amplifier is designed for installation in the control cabinet.
5.3.5 Environmental conditions for vibration/shock IP20
The drive amplifier fulfills the following specifications:
− Vibration according to DIN EN 60068-2-6:2008
o Frequency range 10 Hz – 150 Hz
o Acceleration: 1 g
− Shock according to DIN EN 60068-2-27:2010
o Shock form: Semi-sinusoidal
o Acceleration: 15 g
o Duration of the shock: 11 ms
To Next Page
Loading...