Operation Manual simco
®
drive
en-4 4022-D033499 Revision: 11a
1 About this manual
This manual contains necessary information to safely use the simco
®
drive amplifier,
hereinafter referred to as the drive amplifier.
The operator must ensure that this operating manual is read through by all persons assigned
to install, operate, or maintain the drive amplifier, and that they fully comprehend them.
Store these instructions within reach of the drive amplifier.
Pass the safety instructions on to other persons as well.
The original manual was created in German; all other language versions are translations of
these instructions.
1.1 Signal words
The following signal words are used to indicate possible hazards, prohibitions, and important
information:
This signal word indicates an imminent danger that could cause
serious injuries and even death.
This signal word indicates a potential hazard that could cause
serious injuries and even death.
This signal word indicates a potential hazard that could cause
minor or serious injuries.
This signal word indicates a potential hazard that could lead to
property damage.
A note without a signal word indicates application hints or
especially important information for handling the product.
1.2 Safety symbols
danger
voltage
discharge
sensitive
To Next Page
Loading...