Operation Manual simco
®
drive
Revision: 11a 4022-D033499 en-3
日本語
6.5.3 Motor circuit protection 34
7 Startup and operation 35
7.1 Safety instructions 35
7.2 Startup software 35
7.3 Displays on the drive amplifier 36
7.3.1 Displays on device version
decentral IP65 36
7.3.1.1 LED P1 Status drive 36
7.3.1.2 LED P2 Status fieldbus 37
7.3.1.3 LED P3 Fault status fieldbus 38
7.3.2 Displays on device version central
IP20 39
7.3.3 LED P1 Status drive 40
7.3.4 LED P2 Fault status drive 40
7.3.5 LED P3 Status fieldbus 40
7.3.6 LED P4 Fault status fieldbus 41
8 Maintenance and disposal 43
8.1 Maintenance 43
8.2 Repairs 43
8.3 Disposal 43
9 Appendix 43
9.1 Tightening torques 43
10 Instructions for STO safety
function 43
10.1 Installation space 44
10.2 STO wiring 44
10.3 Important information for STO 44
10.4 Intended use of STO 44
10.5 Improper use of STO 44
10.6 Technical specifications and STO
pin assignment 45
10.7 STO pin assignment 45
10.7.1 STO device version: IP65 decentral
SIM20xxD-FC… 45
10.7.2 STO device version: IP20 central
SIM20xxD-CC… 46
10.8 Function description 47
10.8.1 Safe operation sequence 48
10.9 Functional check 48
To Next Page
Loading...