Operation Manual simco
®
drive
Revision: 11a 4022-D033499 en-5
日本語
1.3 Design of the safety instructions
Explanatory text describes the consequences of not complying
with the instructions.
• Instructional text describes directly what to do.
1.4 Information symbols
The following information symbols are used:
• Indicates an action to be performed
Ü Indicates the results of an action
i Provides additional information on handling
2 Safety
This operating manual, especially the safety instructions, and the rules and regulations valid
for the operating site must be observed by all persons working with the drive amplifier.
In addition to the safety instructions in this manual, also observe any (legal and otherwise)
applicable environmental and accident prevention rules and regulations (e.g. personal safety
equipment).
2.1 Approvals
2.1.1 CE conformity
The drive amplifier was tested in authorized testing laboratories in accordance with the
requirements of this documentation. Deviations and non-conformance with requirements in this
documentation mean that the drive amplifier may not fulfill statutory requirements under certain
circumstances.
The drive amplifier is in conformity with the following directives:
− Machinery Directive (2006/42/EC)
− Electromagnetic compatibility (EMC) (2014/30/EU)
− RoHS Directive (2011/65/EU)
In terms of interference immunity, the drive amplifier fulfills the requirement for the category
"second environment" (industrial environment).
In the area of interference emission, the drive amplifier fulfills the requirements for category C3.
• In a residential environment, the drive amplifier may cause radio
interference, necessitating interference suppression measures such
as an external EMC filter.
To Next Page
Loading...