6-S4
L3130 · L3430 · L3830 · L4630 · L5030, WSM
FRONT AXLE
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-10.)
W10117570
Item N·m kgf·m ft-lbs
Tie-rod lock nut
Front axle adjusting screw
Lock nut (L3130, L3430, L3830, L4630)
(L5030)
Power steering hose retaining nut
Cylinder cover mounting screw
Front wheel mounting nut
Front bracket and rear bracket mounting screw and nut
Tie-rod end nut (L3130, L3430, L3830, L4630)
(L5030)
Bevel gear case mounting screw
(L3130, L3430, L3830, L4630)
(L5030)
Axle flange mounting screw and nut
(L3130, L3430, L3830, L4630)
(L5030)
Axle case support mounting screw (L5030)
Tie-rod joint to steering cylinder
Differential case cover mounting screw
(L3130, L3430, L3830, L4630)
(L5030)
166.7 to 196.1
19.6 to 29.4
39.2 to 58.8
58.8 to 98.1
24.5 to 29.4
60.8 to 70.6
137
77.5 to 90.1
39.2 to 45.1
156.9 to 176.5
123 to 147
166.7 to 196.1
23.6 to 27.5
29.4 to 34.3
127 to 142
166.7 to 196.1
48.0 to 58.8
60.8 to 70.6
17.0 to 20.0
2.0 to 3.0
4.0 to 6.0
6.0 to 10.0
2.5 to 3.0
6.2 to 7.2
14.0
7.9 to 9.2
4.0 to 4.6
16.0 to 18.0
12.6 to 15.0
17.0 to 20.0
2.4 to 2.8
3.0 to 3.5
13.0 to 14.5
17.0 to 20.0
4.9 to 6.0
6.2 to 7.2
123 to 145
14.5 to 21.7
28.9 to 43.4
43.4 to 72.3
18.1 to 21.7
44.8 to 52.1
100
57.2 to 66.5
28.9 to 33.3
115.7 to 130.2
91.1 to 108.5
123 to 145
17.4 to 20.3
21.7 to 25.3
94.6 to 104.9
122.9 to 144.6
35.4 to 43.4
44.8 to 52.1
To Next Page
Loading...
