10-S48
L3130 · L3430 · L3830 · L4630 · L5030, WSM
CABIN
Battery, Front Grill, Skirt and Bonnet
1. Open the bonnet and disconnect the battery negative cable.
2. Disconnect the head light connector and remove the front grill (4).
3. Remove the left and right side skirts (3).
4. Disconnect window washer hoses (2).
5. Remove the bonnet (1).
• When disconnecting the battery cords, disconnect the
negative cord first, when connecting, positive cord first.
W1065454
Hose Clamp
1. Remove the hose bands (1).
2. Remove the hose clamp (2).
• Before disconnecting the heater hoses (3), put the parting
marks on the hoses for marking proper reconnecting.
3. Disconnect the heater hoses (3), then take out them under the
cabin.
(When reassembling)
• Connecting the heater hoses at their original position.
W1027385
Heater Hoses
1. Remove the outer roof.
NOTE
• Before disconnecting the heater hoses (2), put the parting
marks on the hoses for marking proper reconnecting.
2. Disconnect the heater hoses (2) from the hose pipes (1).
3. Remove the inner covers (3).
4. Pull out the heater hoses (2) from the bottom of the cabin.
5. Take out the heater hoses (2).
(When reassembling)
• Connect the heater hoses at their original positions.
• In assembling the heater hose (2) to the pipe (1), connect the
heater hose with identification mark (white paint) to upper side of
the hose pipe.
• When connecting the heater hose with A/C unit, hose should be
put into the A/C unit pipe more than 30 mm (1.2 in.).
W1027522
(1) Bonnet
(2) Window Washer Hose
(3) Skirt
(4) Front Grill
(1) Hose Band
(2) Hose Clamps
(3) Heater Hoses
(1) Heater Pipe
(2) Heater Hose
(3) Inner Cover
To Next Page
