wtw Multi 3430 - Example 1 on Navigation: Setting the Language

Operation Multi 3430
28
ba75865e08 06/2010
4.2.4 Example 1 on navigation: Setting the language
1 Press the <On/Off> key.
The measured value display appears.
The instrument is in the measuring mode.
2 Open the Storage & config menu with <MENU/ENTER_>.
The instrument is in the setting mode.
3 Select the System submenu with <S><T>.
The current selection is displayed with a frame.
4 Open the System submenu with <MENU/ENTER>.
30.09.2009 08:00Info
System
Data storage
Storage & config
22.09.2009 08:00