Multi 3430 Operation
93
ba75865e08 06/2010
4.11.5 Connecting the USB memory device / USB-A
interface (USB Host)
Connect the USB-A interface (USB Host) of the Multi 3430 to a USB
flash drive.
4.11.6 Data transmission to a USB memory device
(USB-A interface)
Via the USB-A interface you can transmit data to a USB memory
device. The following table shows which data are transmitted to the
interface in which way:
1 Connect a USB flash drive to the USB Host interface.
Data Control Operation / description
Stored measured
values
Manual All datasets with the Output to
RS232/USB function.
For details, see section 4.10.3.
Calibration data
storage
Manual All stored calibration records of
a sensor with the Copy to USB
flash drive function.
For details, see the menu for
calibration and measurement
settings of the sensor.
To Next Page
Loading...
Need help?
General
