Operation Multi 3430
32
ba75865e08 06/2010
4.3 Sensor-independent settings
The Storage & config menu includes the following settings:
z System (see section 4.3.1).
z Data storage (see section 4.3.2)
4.3.1 System
Overview The following sensor-independent meter characteristics can be
adjusted in the Storage & config/System menu:
z Menu language
z Beep on keystroke
z Loudness of the beep
z Illumination
z Brightness
z Interval of the automatic switchoff
z Data interface
z Clock and date function
z Reset of all sensor-independent system settings to the default con-
dition
Settings To open the Storage & config menu, press the <MENU/ENTER
_> key
in the measured value display. After completing the settings, switch to
the measured value display with <M>.
Default settings are printed in bold.
Menu item Setting Description
System / General / Language Deutsch
English
(more)
Selects the menu language
System /
General /
Acoustic signal
Beep 1
Beep 2
off
Switches on/off the beep on
keystroke
System / General / Volume 0 ... 5 ... 10 Changes the loudness of the
beep
System / General / Illumination Auto
on
Switches the display illumina-
tion on/off
System / General / Brightness 0 ... 10 ... 22 Changes the display bright-
ness
System / General / Switchoff time 10 min ... 1h ... 24 h Adjusts the switch-off time