Operation Multi 3430
74
ba75865e08 06/2010
4.8.6 Displaying calibration records
The calibration data can be displayed and then output to the interface.
Displaying the
calibration record
The calibration record of the last calibration is available under the menu
item, Calibration / Calibration record. To open it in the measured value
display, press the <CAL
_> key.
The calibration records of the last 10 calibrations are available in the
menu, Calibration / Calibration data storage. To open the Calibration
menu, press the <MENU/ENTER
_> key in the measured value dis-
play.
4 Start the measurement with <MENU/ENTER>.
The measured value is checked for stability (stability control).
The [AR] status indicator is displayed. The measured parame-
ter flashes.
5 Wait for the AutoRead measurement to be completed
([HOLD][AR]) display or
accept the calibration value with <MENU/ENTER>.
The calibration record is displayed and output to the interface.
6 Switch to the measured value display with <MENU/ENTER>.
To Next Page
Loading...
Need help?
General
