Operation Multi 3430
84
ba75865e08 06/2010
4.9.6 Displaying calibration records
The calibration data can be displayed and then output to the interface.
Displaying the
calibration record
The calibration record of the last calibration is to be found under the
menu item, Calibration / Calibration record. To open it in the measured
value display, press the <CAL
_> key.
The calibration records of the last 10 calibrations are to be found in the
menu, Calibration / Calibration data storage. To open the Calibration
menu, press the <MENU/ENTER> key in the measured value display.
6 Wait for the measurement with stability control to be completed
([HOLD][AR]) display or
accept the calibration value with <MENU/ENTER>.
The calibration record is displayed and output to the interface.
7 Switch to the measured value display with <MENU/ENTER>.
To Next Page
Loading...
