wtw Multi 3430 - Resetting the System Settings

Operation Multi 3430
96
ba75865e08 06/2010
4.12.2 Resetting the system settings
The following system settings can be reset to the default condition:
The system settings are reset in the menu, Storage & config / System
/ Reset. To open the Storage & config menu, press the <MENU/
ENTER
_> key in the measured value display.
Setting Default settings
Language English
Acoustic signal On
Volume 6
Baud rate 4800 Baud
Output format ASCII
Decimal separator .
Brightness 15
Illumination Auto
Switchoff time 1 h
Temperature unit °C
USB Host On
Stability control On