Operation Multi 3430
68
ba75865e08 06/2010
FDO Check /
Check interval
1 ... 60 ... 999
d
Interval for the FDO Check (in
days).
The FDO Check status display
indicator in the measuring win-
dow reminds you to check the
sensor regularly.
Sal automatic on
off
Automatic salt content correc-
tion for concentration measure-
ments. The salinity value is
taken from an IDS conductivity
sensor.
This menu item is only available
if an IDS conductivity sensor is
connected.
Salinity from chan-
nel
▭▭▬
▭▬▭
▬▭▭
Selects the channel (sensor),
providing the salinity value.
This menu item is only available
if two IDS conductivity sensors
are connected.
Sal correction on
off
Manual salt content correction
for concentration measure-
ments
Salinity 0.0 ... 70.0 Salinity or salinity equivalent for
the salt content correction.
This function is only available
for concentration measure-
ments if the manual salt content
correction is switched on.
Menu item Possible
setting
Description
To Next Page
Loading...
Need help?
General
