5. At the high capacity feeder, squeeze the handle, and pull out Tray 6 until it stops.
6. Remove the damaged paper from the tray.
7. Reload the tray with undamaged paper, close the side gate, then close the tray.
8. At the control panel, select the correct type and color.
• To select a new paper type, touch TTyyppee.
• To select a new paper color, touch CCoolloorr.
9. To confirm the settings, touch CCoonnffiirrmm.
Xerox
®
AltaLink
®
B8145/B8155/B8170 Series Multifunction Printer User Guide 299
Troubleshooting
To Next Page
Loading...
