Xerox B1025

Energy Saving Settings
Setting the Power Saver Mode Timers in
Xerox
®
CentreWare
®
Internet Services
1. In Xerox
®
CentreWare
®
Internet Services, click Properties→General Setup.
2. Click Power Management.
3. For each timer, specify the time that the printer waits before it enters each power saver mode.
4. Click Apply.
SSeettttiinngg tthhee PPoowweerr SSaavveerr MMooddee TTiimmeerrss aatt tthhee CCoonnttrrooll PPaanneell
The printer exits Energy Saver mode when it receives a print job, or when you press the Power Saver
button. The sum of the two timers cannot exceed 119 minutes.
1. At the printer control panel, press the Machine Status button.
2. Touch Device Settings→General→Power Saver Timer.
3. To select the desired time, press the arrow buttons, or enter a value using the numeric keypad.
• Specify how long the printer remains idle before it goes from ready mode to low-power mode.
• Specify how long the printer remains idle before automatically going from low-power mode to
sleep mode.
4. Touch OK.
108
Xerox
®
B1025 Multifunction Printer
System Administrator Guide
Administrator Tools